3DLab GANG PRINT BEAT MACCHI MC.200 User Manual page 10

member of Group
TAILPLANE & ELEVATORS
Tailplane:
Now you can test fit the right elevator (-12) on to the hexagonal axel (-14). When you are
happy it fits correctly, remove the elevator (-12), apply glue to the hexagonal axel (-14) and re-fit the
elevator (-12) and attach to the tailplane with a piece of 0.7mm-1mm wire.
On a flat surface of the elevators (-9&-12), glue the left elevator piece ( -10) and the right elevator piece
( -13) together.
Hint: Since it is no longer possible to move the part 14 (it is glued), it might be easier for someone to
attach the parts 11 and 12 together. In this case, attach parts 11 and 12 to each other using a wire and
fasten them together to parts 14,17,18
9