To Connect The Handset; To Disconnect The Handset; Assistance - ACS Alcolock GR Instruction Manual

To Connect the Handset

To Disconnect the Handset

Assistance

Contact your Service Centre or toll free line whenever
you require assistance.
INSTRUCTION MANUAL
1. Align the molecule on the cable
connector to the molecule on the
Handset. Align the cable connector
pins to the Handset connector and
carefully plug the two parts together.
2. The connector will not latch if the pins
are not properly aligned.
WARNING! Forcing a misaligned connector
may break the connector, rendering you
unable to use the system and leaving your
vehicle immobilized. DO NOT pull on the
Handset cord or turn the connector. This
could damage the cable.
1.
Hold the connector by the plug and
gently angle the Handset connector to
disengage the connection. Doing so
will reduce the risk of damaging the
connectors or the cable.
WARNING! Disconnection of the cable
when the engine motor is running may
result in program violations.
p. 6/26