General Information - VENDINGBOX 540 Manual

Vending-Box COMPANY

GENERAL INFORMATION

1 Important information on safety.
Please refer to the following tips. Non-compliance with
the instructions may be dangerous or illegal.
The machine is constructed in such a way that the
feeder cannot rotate after the door is open, except for
the situation of the user's purposeful operation as well
as when the sliding flaps are open. In case of damage of
the elements of the door, especially of the sensor of
door opening, sliding flaps or any covers, he machine
must be immediately disconnected from the power
supply.
The device may be repaired only by the qualified
Vending-Box service or authorized service. Repair by a
non-qualified service or non-authorized service can
result in the machine damage and loss of guarantee.
This device is not waterproof. It must be protected from
moisture.
The battery cannot be exposed to very low or very high
temperatures (below -15°C /5°F or above 40°C / 104°F).
Extreme temperatures may affect the volume and
durability of the battery. The battery should also be
protected from liquids and metal objects. This kind of
contact may partly or entirely damage the battery. The
battery is to be used only for its intended purpose. You
must not destroy or damage the battery or throw it to
fire – it may be dangerous and cause a fire. Used or
damaged battery should be put in a special container.
You must not open the battery. Installation of a battery
of an inappropriate type may cause fire or explosion.
The device is a class A product, it may cause
disturbance in radio waves, which will need
undertaking action by the user.
2 Use of the device
540 dispenser is a combination of an automatic
dispensing cabinet and managing software.
The system solves the problems of managing and
dispensing of many types of products for industrial and
other purposes in production places.
The use of the system of dispensing management with
the use of 540 dispenser facilitates analysis and control
of all the distributed items, ensures safety and
availability of products 24 hours a day, 7 days a week
without additional cost of storing and manual
distribution.
3 In case of failure
In most cases any technical problems are fixed on the
way of minor repairing operations. However, before
contacting the producer, careful reading of the following
manual is recommended. If any serious failure occurs,
contact an authorized service.
4 Identification of the device
Each machine is identified by a unique serial number,
which can be found on the rating plate fixed to the back
of the device, at the bottom part. The rating plate
includes data, which allow the user to define basic
parameters of the device, such as electric parameters or
the dispenser's weight.
The rating plate includes information on :
1. data of the producer
2. name of the device
3. information on power supply
4. CE marking
5. maximum power consumption
6. weight
7. unique serial number
8. year of production
5 Parameters
Dimensions
Weight
Permissible weight
Range of work
temperature
Relative humidity
Frequency
Power
Maximum current
Power consumption
Communication
interfaces
Accepted proximity
cards
13,56 MHz
*maximum load of a single loading shelf 0,5kg
**version with extended range of working temperatures
***average power consumption/maximum momentary
power consumption
Model 540
Height 1915 mm
Width 805 mm
Depth 790 mm
400 kg
275 kg*
5-40 / -15-40 °C**
do 80%
Voltage 230 VAC
50Hz
1A
25 W / 150
W***
Ethernet
Wi-Fi
GSM
VNET
Unique
Hitag
125kHz
Q5
HID
MIFARE®
Classic
MIFARE®
Plus
MIFARE®
Ultralight
MIFARE®
Ultralight C
MIFARE®
DESFire
MIFARE®
DESFire
EV1.