User's Interface - VENDINGBOX 540 Manual

Vending-Box COMPANY
Thank you for choosing the Vending-Box Company
device. The aim of the following manual is to
familiarize the user with operating and functions of the
device.
Vending-Box Company allows to copy this manual only
as whole since it forms am integral unity.
The device and the screenshots used in the manual
may differ from the actual device. Accessories added to
the device may look different from the ones illustrated
in this manual. The latest version of the manual can be
found on the Vending-Box Company webpage:
http://www.vending-box.com.
The producer reserves the right to modifying the
properties of the equipment described in the manual
without giving earlier information and does not take
responsibility for any errors in this document being the
result of inappropriate printing.
EXPLANATION OF SYMBOLS
In order to emphasize important information, there are
two ways of presenting important information in the
text. The first one refers to safety tips.
Other important information which need special
attention are marked in the following way:
Safety tips are marked with a warning triangle
and gray patch lined with horizontal lines above
and below the text.
The tips in the text are marked with this symbol.
They are lined with horizontal lines above and
below the text.
The words in bold are entries explained in the glossary.
GLOSSARY
DISPENSING POINT
a group of devices within which there is one master
device equipped with the user's interface, controlling
work of other devices. In the managing application, the
group of devices is displayed as one block. The most
basic case is when the dispensing point is formed of
only one master device.

USER'S INTERFACE

a panel in the right door of the dispenser, used for
communication between a person and the machine. It
contains a display, group of buttons and proximity card
scanner.
MASTER DEVICE
a device which is a part of VNET net devices,
responsible for general control .
SUBORDINATE DEVICE
a device which is an extra equipment for the master
device, controlled by it and completely dependent on it,
with no possibility of functioning independently.
MANAGING APPLICATION
program which enables to manage a group of dispensing
points, installed and started on Vending-Box or Client's
servers.
ROTATING FEEDER
central part of the device whose role is to store products.
The feeder which is also called 'a drum' consists of a
set of cells.
PRODUCT CELL
limited room for keeping products in the feeder.
PROXIMITY CARD
an individual user's card for automatic identification.
Model 540