Table of Contents
Advertisement
Vending-Box COMPANY
15.1 ETHERNET interface
In order to configure Ethernet interface, match the right
values with the parametres below:
NAME
Description
Defines if the interface is on. Admissible
ETH
value YES or NO.
IP address of the device in X.X.X.X or
ETH_AD
DHCP in case of the dynamically
DR
assigned address.
Net mask in X.X.X.X. Ignored parameter
ETH_MA
in case of switching on the client's
SK
DHCP.
IP address of the gate in the net in
ETH_G
X.X.X.X. The parametre is ignored in
W
case switching on the client's DHCP.
All the predefined text values should be typed in capital
letters.
15.2 WLAN interface
In order to configure WLAN interface match the right
values with the parametres below:
NAME
WLAN Description
Defines if the interface is on. Admissible
WLAN_
value YES or NO.
ADDR
IP address of the device in X.X.X.X or
WLAN_
DHCP in case of the dynamically
MASK
assigned address.
Net mask in X.X.X.X. Ignored parameter
WLAN_
in case of switching on the client's
GW
DHCP.
IP address of the gate in the net in
WLAN_S
X.X.X.X. The parametre is ignored in
SID
case switching on the client's DHCP.
Name of the wireless net, which the
WLAN_P
device is to be connected with.
ASS
All the predefined text values should be typed in capital
letters.
15.3 Interfejs GSM
In order to configure GSM interface, match the right
values with the parametres below:
NAZWA
Description
Defines if the interface is on. Admissible
GSM
value YES or NO.
GSM_A
Access number.
CCN
GSM_A
Name of the access point.
PN
GSM_PI
PIN number of the SIM card.
N
Defines if during connecting, the text
GSM_S
messages are to be deleted from the
MS
SIM card. Admissible value YES or NO.
All the predefined text values should be typed in capital
letters.
Configuration of the connection of packet data
Description
depends on the operator and the tariff plan. If you do not
know the settings needed for connection through GSM,
contact an operator of the net which the used SIM card
In case of wrong PIN code, the SIM card may be
blocked. Before you start transmission of packet data,
make sure the given PIN code is right.
Model 540
Advertisement
Table of Contents
