VENDINGBOX 540 Manual page 12

Vending-Box COMPANY
For every level, there is information about the matched
product, the current number of the products and the
volume of all the level. To find out about the number of
the products after loading, use the buttons on the left
and right side, here: decrease and increase the number
by 1. Instead of the icon +, there may appear the button:
F (Full) setting the current number of products to the
maximum for the certain level.
If the number of products on a certain level has
not been changed, do not interfere in the current
number of products
After entering the data is finished, exit from the main
menu and save the changes. Data about loading will be
saved after the exit from the main menu.
Product downloading
The basic function of the device is product dispensing.
This function is available for each type of user, i.e.
DOWNLOADER, LOADER,
However, the menu of product downloading is a default
menu after the user's logging in only for the
DOWNLOADER. In other cases it is the service menu
with additional functions.
After moving to the menu of product downloading, the
user can see the catalogue of products, which are
available for him according to the profile of his
authorizations. The user selects the product he wants to
download selecting first the category which the product
belongs to. Below there is a description of an example
of choosing dotted gloves, size 9. In this case, the user
presses the button which is on the right side of the
gloves icon.
Next, the user selects the type of product on the screen
of categories, here this is the button of the type
DOTTED, on the left side.
Finally the user selects the product, which is the SIZE 9
here on the screen of products for this type.
SERVICEMAN.
After selecting the product, it is displayed on the
dispensing screen, where there is also information on
the state of the machine and commands for the user. The
dispenser prepares the feeder so that the nearest chosen
product is available through the flaps. Next, the flap
behind which there is the loaded cell is unlocked. The
user is informed about this by a short sound signal and
the colour of the LED diode of the selected flap changes
from red to green. Now the user can open the cell by
moving the flap, download the chosen product and close
the flap. The operation of dispensing is recorded in the
device memory and sent to the system.
In order to download next product, repeat the described
operation.
Besides the view of products in the catalogue, the user
may see the list of products downloaded in the recent
time. In this way the stage of selecting a product is
shortened. To move to this list, press the middle button
on the user's panel, on the screen of categories. To
move back to the screen of categories, press the same
button on the screen of downloading history list.
During the product downloading, check if all the
elements which were in the product cell were taken.
Leaving elements which would stick out of the cell
space might cause blocking the feeder rotation.
Model 540