Table of Contents
Advertisement
Vending-Box COMPANY
5 The parts required during the reconfiguration of
the machine.
In order to change the configuration of the dispenser, it
may be necessary to install additional elements, which
were not installed at the production stage. Here is the
list of elements which may be supplied as additional
equipment:
1. Sliding flap (low, medium, high)
2. Aluminum flap rail
3. Limiter of flap opening
4. Middle shelf of the drum
5. Cell partition (low, medium, high)
6. Pin securing a partition
7. Set of screws to fix the drum shelf.
Model 540
Advertisement
Table of Contents
