Control Panel - Fisher & Paykel WH1060S1 User Manual

1
2
1 Power
2 Keylock
3 SmartTouch™
Control Dial
4 Digital display
screen
5 Progress lights
6 Delay Start
Less/More
7 Auto Dose
8 Wash Temp
9 Spin Speed
!0 Optimise Wash
!1 Wash Boost
!2 Add a Garment
!3 Start/Pause

CONTROL PANEL

3 4
Press to turn the washer
Press to disable all buttons on the control panel, except the
button. This prevents accidental button presses.
POWER
Rotate to select your desired wash cycle.
Red LED illuminates to indicate the selected wash cycle.
z
Shows the following:
– the remaining time in the cycle that is
TIME TO GO
z
currently running.
Delayed start time of wash cycle.
z
Notifications if an error is detected or a warning is necessary.
z
Indicate the current status of the wash cycle.
All lights are illuminated at the start of the wash cycle.
z
The light of the current status flashes, and then turns off
z
once completed.
Press to increase and
MORE
start time.
Press to select
MANUAL
and softener.
Press to increase or decrease wash water temperature.
Press to increase or decrease spin speed.
Press to select
SPEED
Press to select
PRE WASH
Press to interrupt the wash part of the cycle to add or
remove items.
Press to start or pause the selected wash cycle.
Press and hold this and
(WiFi) mode.
REMOTE
5
6 7 8
ON/OFF.
LESS
or
AUTO DOSE
, or
ECO QUIET.
, or
RINSE+ WASH+.
ADD A GARMENT
9 !0 !1
to decrease the delay
dispensing of detergent
for three seconds to enable
!3
!2
9