Table of Contents
Advertisement
2-2 Frames and Wireways
Wireway
5. Remove the
screws
on either side of the
transport handle
using a Torx T25 screwdriver.
Figure 2-2. Remove the two screws securing the transport handle
6. Push the transport handle toward the rear of the cabinet then remove it from the frame.
Figure 2-3. Pull the transport handle toward the rear of the cabinet then remove it
OmniTT/AnesthesiaTT Installation and Service Guide/67-2024 Rev D
© 2010 Omnicell, Inc.
Advertisement
Table of Contents
