Table of Contents
Advertisement
Replace shelving in your preferred positions
FIRST USE
Shelf positions
We recommend placing the sliding shelves
on positions 2 and 4 for everyday cooking.
To replace wire shelves
Guard rail
Check the shelf is positioned correctly, with
the guard rail at the back, then slide into
place on the side racks. The shelf must sit
between the two wires of the shelf position.
To replace sliding shelves (OBSC6 only)
1 Grip the shelf at the front, making sure
Guard rail
2 Ensure the shelf is level and facing the
Front bar
3 Place the shelf on top of the side racks at
4 Push the shelf all the way into the oven,
Ensure sliding shelves are positioned on top
of the side rack wires not between them.
When there is food in the oven, take care to
slide the shelves horizontally when extending
them. This will prevent the tags lifting off the
side racks and the shelf tipping over.
you hold the wire shelf and the sliding
frame together.
right way with the guard rail at the back.
the desired height, hooking the rear tags
over the side racks on both sides.
ensure the front tags are also securely
hooked over the side racks.
11
Advertisement
Table of Contents
