Table of Contents
Advertisement
1.4 Propeller installation and disassembly
Before installing the propeller, please carefully check the letters
beside the aircraft motor and the letters on the propeller. The two
letters must be the same when installing; When the blade is dam-
aged or needs to be replaced, remove the screw counterclockwise
to remove the propeller.
Use the only HUBSAN original Propeller, because it comes with
screw glue to prevent losing propellers. (HUBSAN Standard acces-
sories come with original screws)
HUBSAN brand new propeller
screws come with screw glue (blue).
2 R em ot e Con tr ol ler
2.1 Remote Controller Diagram
(1). Throttle / Aileron stick
(2). Elevator / Rudder stick
1. Throttle / Rudder Joystick
2. Elevator / Aileron Joystick
3. Return to Home (Aircraft
Returns to Takeoff Point)
4. Power (Long press)
5. Auto Takeoff / Land
6. Expert / Normal Mode
7. Power Status LEDs
8. Photo
9. Video
10. Gimbal Adjustment Wheel
11. Charging / Adapter Port
12. WIFI Antenna
13. Adapter Cable
When installing the mobile device, place the device in its dedi-
cated frame and avoid pressing the device's buttons with the
frame.
1（2）
6
7
10
8
11
06
3
4
5
2（1）
9
13
12
Advertisement
Table of Contents
