P/N 428668A
REPLACING FLUORESCENT LAMPS
Fluorescent lamps are furnished with moisture
resistant lamp holders, shields and end caps.
Whenever a fluorescent lamp is replaced, be cer-
tain to reinstall the lamp shields and end caps.
The switch in the canopy operates both the canopy
and the shelf lamps. The rail lamp switch is locat-
ed on the rail.
Plastic Shield
Fluorescent
Lamp
WARNING
!
Always
disconnect
power at the main disconnect when
servicing or replacing any electrical
component. This includes, but is not
limited to, such items as fans, heaters,
thermostats and lights.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
End Cap
the
electrical
REPLACING LAMP HOLDERS AND
END CAPS
The Hussmann Impact lamp holder is designed to
snap into the sheet metal of the case. The lamp
holder has a locking 'nub' which fits inside the
groove of specially designed end caps.
Hussmann
Impact
End-Cap
IMPORTANT!
Always replace lamp holders and end caps with
Hussmann lamp holders and end caps.
Use of non-Hussmann parts may result in poor
electrical contact and short lamp life.
Medium Temperature
6-3
Groove
Nub
Hussmann
Impact
Lamp Holder