Dsppnportrsrc - Cisco MGX 8850 Command Reference Manual

dsppnportrsrc

dsppnportrsrc
Display Port Resources
Displays available bandwidth and channels on the port for all service classes.
Cards on Which This Command Runs
PXM45
Syntax
dsppnportrsrc <portid>
Syntax Description
portid
Related Commands
dsppnports
Attributes
Log: log
Example
Display the available resources on port 11:1.1:11.
GGeneva.7.PXM.a > dsppnportrsrc 11:1.1:11
:
Maximum Tx Cell Rate (cells/sec):
7
Maximum Rx Cell Rate (cells/sec):
7
Min Guarant Tx Cell Rate (cells/sec):
0
Min Guarant Rx Cell Rate (cells/sec):
0
Minimum Cell Loss Ratio Tx :
6
Minimum Cell Loss Ratio Rx :
6
Available Tx Cell Rate (cells/sec):
5
Available Rx Cell Rate (cells/sec):
5
# of Available Tx Channels:
3
# of Available Rx Channels:
3
Cisco MGX 8850 Routing Switch Command Reference
6-94
See PNNI Format, page
format [shelf.]slot[:subslot].port[:subport].
State: active, standby
abr: sig:
351707 353207
351707 353207
0 1500
0 1500
6 8
6 8
344035 344035
344035 344035
28903 28903
28903 28903
Chapter 6
6-4. The portid represents the PNNI physical port and has the
Privilege: ANYUSER
cbr: rt-vbr:
351707 351707
351707 351707
0
0
10
10
344035 344035
344035 344035
28903 28903
28903 28903
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Logical Node, Port, and Signaling Commands
nrt-vbr: ubr
351707 35170
351707 35170
0 0
0 0
8 6
8 6
344035 34403
344035 34403
28903 2890
28903 2890