Cnfpnni-Svcc-Rcc-Timer - Cisco MGX 8850 Command Reference Manual

cnfpnni-svcc-rcc-timer

-callingIntegrityTime
-calledIntegrityTime
Related Commands
dsppnni-svcc-rcc-timer
Attributes
Log: log
This command is not supported by the current release.
Cisco MGX 8850 Routing Switch Command Reference
5-42
The number of seconds the node waits while it attempts to set up an SVCC
as the calling party. If the SVCC is not fully established within this time
period, the node tears down the connection.
Range: 5–300.
Default = 300.
The number of seconds the node waits while it attempts to set up an SVCC
as the called party. If the SVCC is not fully established within this time
period, the node tears down the connection.
Range: 10–300.
Default = 300.
State: active Privilege: SUPER_GP
Chapter 5
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
PNNI Commands