Clrbecnt - Cisco MGX 8850 Command Reference Manual

Chapter 3 Equipment and Resource Provisioning

clrbecnt

Clear Bit Error Count
The clrbecnt command lets you clear the APS-related bit error counters for a working line. To see the
contents of the error counters, use the dspbecnt command.
Cards on Which This Command Runs
AXSM
Syntax
clrbecnt <working-bay.line>
Syntax Description
working-bay.line
Related Commands
addapsln, cnfapsln, delapsln, dspapsln, dspapslns, switchapsln, dspbecnt
Attributes
Log: no log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Identifies the bay (1 or 2) and the number of the line. The line number is from 1
to the highest numbered line on the back card. For the range of line numbers on
specific AXSM models, see
State: active
Table 3-1.
Privilege: SERVICE_GP
Cisco MGX 8850 Routing Switch Command Reference
clrbecnt
3-21