Wic-1Dsu-T1 - Cisco ICS-7750 Description

Chapter 2 Processor Cards Feature Summary

WIC-1DSU-T1

Technical Specifications
Table 2-18 Technical Specifications for WIC-1DSU-T1 Card
Type
Interface type
Serial network support
Physical connector
Number of connectors/ports
Cisco IOS requirement
Compliance
Safety conformance
Spare
78-10360-02
The WIC-1DSU-T1 card is a single-port, T1/fractional T1 CSU/DSU interface
card. Use the WIC-1DSU-T1 card for a cost effective router-CSU/DSU
combination with the following features:
T1 or fractional T1 network interface
•
• N x 64-kbps or N x 56-kbps non-channelized data rates (N = 1 to 24)
Full management features:
•
Configuration: Capability for remote configuration via Telnet from the
–
Cisco IOS CLI.
Monitoring: Router and CSU/DSU manageable as a single SNMP entity;
–
extensive CSU/DSU statistics provided by the Cisco IOS CLI.
Troubleshooting: Extensive loopbacks (including a manual button for
–
network line loopback), bit error rate tester (BERT) test patterns, alarm
counters, and performance reports, all of which are accessible from the
Cisco IOS CLI. LEDs for carrier detect, loopback, and alarm functions.
Table 2-18 lists the technical specifications for the WIC-1DSU-T1 card.
Description
T1 or fractional T1
Synchronous, full duplex
RJ-45
One
11.3(4)T or later
FCC Class B device, CE
UL1950
WIC-1DSU-T1=
Voice and WAN Interface Cards
Cisco ICS 7750 System Description
2-43