ERRATA
5.1.25
Header Dump menu
This function is to specify whether to print the following information (dump data) of print data.
Data Header
・
Number of Dot in Data (Printed only when the header dump setting is "On".)
・
・
Printer Serial Number
・
Firmware Version
Data size
・
Data receiving time
・
The dump data will be used as a reference material to receive technical supports.
・
When a print is executed in connection with computer, the setting of RIP software will be
・
printed in the "Data Header".
Setup Item
Header Dump
VJ1324E-A-04c
Set Value
Description
<Off>
・
Only a print data will be printed.
Damp data will not be printed.
・
On
After printing of print data, the dump data will be printed.
Dump
Only a dump data will be printed, but the "Number of Dot in
・
Data" will not be printed.
Print data will not be printed.
・
Print
Prints the last header dump.
If no history is available, "No Print Data" will appear on the operation
panel.
—
[Enter] key: saves the setting and shifts to the next menu.
・
[Cancel] Key: Save the set value, and return to the previous
・
menu.
Operation manual "5.1 Setup menu"
VJ-1324 OPERATION MANUAL
8
June 2018
MUTOH INDUSTRIES LTD.