6.5.4.29
File management Initialize menu
Values of the File management menu are set to the setup value (initial value) at the factory shipping.
Notes
•
File management initialize menu is displayed when the hard disk has been installed.
Setup items
File Mng.
6.5.5 Setup menu 5/5
6.5.5.1 Data dump menu
To perform dump printing for online function check.
Setup items
Data Dump
Parameters
NO
OK
–
Parameters
Start / End
All
-
User's Guide – Osprey 75/102/130
Descriptions
No initialization.
To perform initialization.
After setting, shifts to the previous hierarchy menu.
Refer to: "Initialize setup menu"
•
Damp printing is used by service
person to check the functions of
the printer. Do not use this function
for normal printing.
After setting, shifts to the previous
hierarchy menu.
Refer to: "Setup menu"
156
Chapter 6: Printer menu
Descriptions
Notes
AP-75102, Rev. 2.0, 28/11/2007