Leds - Cisco CATALYST 2960 Hardware Installation Manual

Front Panel Description
Figure 1-21
SYST
STAT
DPLX
SPD
Figure 1-22
1

LEDs

You can use the switch LEDs to monitor switch activity and its performance.
switch LEDs and the Mode button that you use to select one of the port modes.
All LEDs are visible through the GUI management applications—Network Assistant for multiple
switches and the device manager for a single switch. The switch software configuration guide describes
how to use the CLI to configure and to monitor individual switches and switch clusters.
Only the Catalyst 2960 PoE switches have a PoE LED.
The four Catalyst 2960 8-port switches and these models do not have an RPS connector or an RPS LED:
Catalyst 2960-24-S, Catalyst 2960-24TC-S, Catalyst 2960-48TT-S, Catalyst 2960-48TC-S.
Catalyst 2960 Switch Hardware Installation Guide
1-14
Connecting Through a 10/100/1000 Port
1x 2x 3x
CONSOLE
MODE
Connecting Through an External AC Power Adapter
1
48 V
, 0.3 A
Power adapter port
4x 5x 6x 7x 8x
Chapter 1 Product Overview
Catalyst 2960
Series
1
PoE INPUT
1
Figure 1-23 shows the
OL-7075-09