Rear Panel Description; Cable Guard For The Catalyst 2960 8-Port Switches - Cisco CATALYST 2960 Hardware Installation Manual

Chapter 1 Product Overview

Cable Guard for the Catalyst 2960 8-Port Switches

You can order an optional cable guard to secure cables to the front of the Catalyst 2960-8TC-L,
2960G-8TC-L, 2960-8TC-S, and 2960PD-8TT-L switches and prevent them from being accidentally
removed.
To order a cable guard, contact your Cisco representative using these part numbers:
•
•

Rear Panel Description

•
•
•
Depending on the Catalyst 2960 switch model, the switch can have an RJ-45 console port, a fan exhaust,
an RPS connector, and an AC power connector (see
panel).
Figure 1-25
1
2
1. The Catalyst 2960 8-port switches have the console port on the
2. These Catalyst 2960 switches do not have an RPS connector:
3. The Catalyst 2960 8-port switches do not have a fan.
4. The Catalyst 2960PD-8TT-L switch does not have an AC internal
OL-7075-09
CBLGRD-C2960-8TC: Catalyst 2960-8TC-L, 2960-8TC-S, and 2960PD-8TT-L switches
CBLGRD-C2960G-8TC: Cisco Catalyst 2960G-8TC switch
Internal Power Supply, page 1-20
Cisco RPS, page 1-20
Console Port, page 1-21
Catalyst 2960 Switch Rear Panel
CO NS OL
E
1 2
1
RJ-45 console port 3
3
4
Fan exhaust
front panel rather than on the rear panel.
Catalyst 8-port switches, 2960-24-S, 2960-24TC-S, 2960-48TC-S,
and 2960-48TT-S switches.
power supply.
Figure 1-25
3 4
2
RPS connector
4
AC power connector
Catalyst 2960 Switch Hardware Installation Guide
Rear Panel Description
for an example of a Catalyst 2960 rear
1-19