Cisco CATALYST 2960 Hardware Installation Manual page 15

Chapter 1 Product Overview
both at the same time. Use the software to set the connector type for these ports. For more information
about the dual-purpose port, see the
Figure
Figure 1-2
SYST
STAT
DUPLX
SPEED
MODE
1 10/100 ports 2
Figure 1-3
1
SYST
STAT
DUPLX
SPEED
MODE
1 10/100 ports 2
The 10/100 ports on the Catalyst 2960-48TT-S switch are numbered as follows: The first member of the
pair (port 1) is above the second member (port 2), port 3 is above port 4, and so on. This switch has two
10/100/1000 uplink ports, numbered 1 and 2. The See
Figure 1-4
1 10/100 ports 2
OL-7075-09
1-3.
Catalyst 2960-24TC-S Switch Front Panel
Dual-purpose ports
Catalyst 2960-48TC-S Switch Front Panel
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Dual-purpose ports
Catalyst 2960-48TT-S Switch Front Panel
10/100/1000 ports
"Dual-Purpose Port" section on page
1
23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
1
Figure
1
Catalyst 2960 Switch Hardware Installation Guide
Front Panel Description
1-13. See Figure 1-2
Catalyst 2960
Series SI
2
Catalyst 2960
Series SI
43 44 45 46 47 48
2
1-4.
Catalyst 2960 Series SI
2
and
1-5