ABB DCS800 Installation And Start-Up Manual page 20

18
Regulatory Compliance
The converter module and enclosed converter components are designed for use in industrial envi-
ronments. In EEA countries, the components fulfil the requirements of the EU directives, see table
below.
European Union Directive
Machinery Directive
98/37/EEC
93/68/EEC
Low Voltage Directive
73/23/EEC
93/68/EEC
EMC Directive
89/336/EEC
93/68/EEC
North American Standards (*)
In North America the system components fulfil the requirements of the table below.
Rated supply voltage
to 600 V
>600 V to 990 V
Hardware
(*)
Manufacturer's Assur-
ance
Declaration of Incorpora-
tion
Declaration of Conformity
Declaration of Conformity
(Provided that all installa-
tion instructions concern-
ing cable selection, ca-
bling and EMC filters or
dedicated transformer are
followed.)
Converter module
• see UL Listingwww.ul.com / certifi-
cate no. E196914
Approval: UL
c us
The spacings in the modules were
evaluated to table 36.1 of UL 508 C.
Spacings also comply with table 6 and
table 40 of C22.2 No. 14-05.
• or on request
EN / IEC xxxxx see table above.
Available for converter modules in-
cluding field exciter units.
3ADW000197R0101 DCS800-R Sel e a
Harmonized Standards
Converter module
EN 60204-1
[IEC 60204-1]
EN 61800-1
[IEC 61800-1]
EN 60204-1
[IEC 60204-1]
EN 61800-3 ➀
[IEC 61800-3]
➀ in accordance with
3ADW 000 032
Standards
Enclosed converter
UL types: on request
EN / IEC types: on request
(for details see table above)
Enclosed converter
EN 60204-1
[IEC 60204-1]
EN 60204-1
[IEC 60204-1]
EN 60204-1
[IEC 60204-1]
EN 61800-3 ➀
[IEC 61800-3]
➀ in accordance with
3ADW 000 032/3ADW 000
091