Cleaning And Maintenance Instructions; Cleaning Instructions; [A] Cleaning Procedure - Hoshizaki KM-150BAF Instruction Manual

III. CLEANING AND MAINTENANCE INSTRUCTIONS III. CLEANING AND MAINTENANCE INSTRUCTIONS
III. CLEANING AND MAINTENANCE INSTRUCTIONS III. CLEANING AND MAINTENANCE INSTRUCTIONS III. CLEANING AND MAINTENANCE INSTRUCTIONS
Ensure all components, fasteners and thumbscrews are securely in place
after any maintenance or cleaning is done to the equipment.

1. CLEANING INSTRUCTIONS

1. CLEANING INSTRUCTIONS 1. CLEANING INSTRUCTIONS
1. CLEANING INSTRUCTIONS 1. CLEANING INSTRUCTIONS
1. Hoshizaki recommends cleaning this unit at least once a year. More
frequent cleaning, however, may be required in some existing water
conditions.
2. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
3. Always wear liquid-proof gloves for safe handling of the cleaning and
sanitizing solutions. This will prevent irritation in case the solutions come
into contact with skin.

[a] CLEANING PROCEDURE

[a] CLEANING PROCEDURE
[a] CLEANING PROCEDURE [a] CLEANING PROCEDURE [a] CLEANING PROCEDURE
1) Dilute approximately 5 fl. oz. (148 ml.) of recommended cleaner, Hoshizaki "Scale Away"
or "Lime-A-Way" (Economics Laboratory, Inc.) with 1 gal. (3.8 l.) of water.
2) Remove the Front Panel.
3) Remove all ice from the Evaporator and the Storage Bin.
Note: To remove cubes on the Evaporator, move the Control Switch,
on the Control Box, to the "OFF" position and move it back to the
"ICE" position after 3 minutes. The defrost cycle starts and the
cubes will be removed from the Evaporator.
4) Move the Control Switch to the
"OFF" position. Open the Door.
5) Remove the Cube Guide and the
Overflow Pipe to drain the Water
Tank. See Fig. 2. Place the
Overflow Pipe in position.
6) Pour the cleaning solution into the
Water Tank.
IMPORTANT IMPORTANT
IMPORTANT IMPORTANT IMPORTANT
WARNING WARNING WARNING
WARNING WARNING
Fig. 2 Fig. 2 Fig. 2 Fig. 2 Fig. 2
16