Table of Contents
Advertisement
OMI Operations Manual: OMI6900 Series
3. Using a #1 Phillips screwdriver, remove
the 1 screw retaining the storage bracket.
Then carefully slide the bracket out of the
unit.
4. The DIP switches and switch settings are
now visible.
5. Reference the "COM1 Function Switch
Setting" label and the chart to set the DIP
switch 6 for AT(Default) or ATX
OMI Operations Manual: OMI6900 Series
Function
Auto Power ON
(AT Default)
Remote Switch
Power ON (ATX)
S_422
(switch 6)
ON
OFF
24
24
Advertisement
Table of Contents
Need help?
Do you have a question about the OMI6912A and is the answer not in the manual?