Page 1
Hardware Supplied Phillips & Flathead screwdrivers required. For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 2
Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver. Attach panels [3] and [4] to panel [1] with 6x dowels (A) and secure with 6x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3
Attach panel [2] to the unit with 6x dowels (A) and secure Attach the legs [5] and [8] to panel [2] as shown using 20x screw (F) .Tighten with 6x screws (B). Tighten with a screwdriver. with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4
Press the clip down on the back of the door to 32x screws (E). Tighten with a screwdriver. assemble the door. Push the clip back up to lock into place. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Kirra Coffee Table and is the answer not in the manual?
Questions and answers