Designing A Sequential Control System Based On The Example Of A Drill - Siemens SIMATIC S7-GRAPH Manual

3 Designing a Sequential Control System
based on the Example of a Drill
Welcome to the S7-Graph Beginner's Example
If you take an hour to work through the beginner's example, you will learn how to
create a sequential control system for automating the drill as described below.
You first learn how to configure a sequential control system efficiently and will then
be guided step by step through the tasks you need to perform in the SIMATIC
Manager and in S7-Graph so that you can
• create the sequential control system,
• download it to the CPU
• and test it.
The correctly programmed sample is supplied with S7-Graph as a project called
"ZEn02_01_S7Graph_Drill".
S7-GRAPH for S7-300/400 Programming Sequential Control Systems
C79000-G7076-C526-01
3-1