Program Selection; Controls - Miele PWM 912 Operating And Installation Instructions

Supervisor level

Controls

Opening the Su-
pervisor level (laun-
dromat version)
56

Program selection

You can select whether the washing machine is operated as a laun-
dromat machine. Shortcuts are the easiest way to operate the ma-
chine. Operating staff are unable to change pre-set programs.
Tip: Start by configuring all necessary settings and changes to the
washing machine before adjusting any of the options below.
If "Laundromat, basic" or "Laundromat, Logo" are selected, the Su-
pervisor level can no longer be opened from the display after the Su-
pervisor level is closed. Please follow the instructions below if you
wish to change any other settings.
Switch on the washing machine and open the door.

Touch the Start/Stop sensor control and hold it down while carrying

out steps –.
Close the washing machine door.

The Start/Stop sensor control will now be flashing quickly; wait un-

til it lights up constantly.
Release the Start/Stop sensor control when the Start/Stop sensor

control lights up constantly.
Standard (factory default).
All functions and programs can be displayed.
Laundromat, basic
Up to 12 programs are available. Go to
which programs are to be listed.
Laundromat Logo
Up to 12 programs are available. Go to
which programs are to be listed.
External program selection
Programs are selected using a communication module, e.g., an exter-
nal terminal.
Favorite programs to select
Favorite programs
to select