Starting A Program - End Of A Program - Miele PWM 912 Operating And Installation Instructions

Starting a program – end of a program
Starting a program
The program can be started as soon as the Start/Stop sensor control
is flashing on and off.
Touch the Start/Stop sensor control.

The door will lock ( symbol) and the program will start.
If a delay-start period has been selected, this will appear in the dis-
play.
The program duration will appear in the display either straight away or
once the delay-start period has elapsed. The program sequence is
also shown in the display.
Tip: You can use the pull-down menu to display the selected temper-
ature, spin speed, and any selected extra options.
End of program
The door remains locked during the anti-crease phase. However, the
washing machine door can be unlocked at any time by touching the
Start/Stop sensor.
Removing the laundry
Pull open the door.

Remove the laundry.

Items left in the drum could discolor other items in the next wash or
become discolored themselves.
Remove all items from the drum.
Check the folds in the door seal for any foreign objects.

Tip: Leave the door slightly open to allow the drum to dry.
Switch the washing machine off with the  button.

If applicable, remove the used cap from the detergent dispenser

drawer.
Tip: Leave the detergent dispenser drawer slightly open to allow it to
dry.
29