Start The Program - Program End - Miele WWF 060 Operating And Installation Instructions

6. Start the program - Program end

Starting a program
 Touch the flashing Start/Stop sensor
button.
The door will lock ( will appear in the
display to show this) and the wash pro-
gram will start.
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the program
has started (if no delay start time has
been selected), the program duration
will appear in the time display.
Energy savings
After 10 minutes, the indicators dim.
The Start/Stop sensor button will light
up, flashing.
You can reactivate the indicators:
 Touch the Start/Stop sensor button
(this does not have any effect on a
running program).
The drum lighting switches off once the
program has started.
Program end
The door is still locked during the Anti-
crease phase and the following will ap-
pear alternately in the display:
 
 End/Anti-Crease
 
and
 
 Press Stop button
 
 Touch the Start/Stop sensor button.
The door will be unlocked.
32
 Pull open the door.
 Remove the laundry.
Items left in the drum could discolor
other items in the next wash or be-
come discolored themselves.
Check that all items have been re-
moved from the drum.
 Check the folds in the door seal for
any small articles.
Tip: Leave the door slightly open to al-
low the drum to dry.
 Turn the program selector to the 
position. This switches the washing
machine off.
 If applicable, remove the used cap-
sule from the detergent dispenser
drawer.
Tip: Leave the detergent dispenser
OK
drawer slightly open to allow it to dry.
OK