Table of Contents
Advertisement
6. Starting a program – end of a program
Payment system
If your machine is connected to a pay-
ment system, the amount of payment
required will appear in the display.
Do not cancel the program once it has
started. Depending on the settings,
money may be lost in the payment
system.
Starting a program
The program can be started as soon as
the Start/Stop sensor control is flashing
on and off.
Touch the Start/Stop sensor control.
The door will lock ( symbol) and the
program will start.
If a delay-start period has been se-
lected, this will appear in the display.
The program duration will appear in the
display either straight away or once the
delay-start period has elapsed. The
program sequence is also shown in the
display.
Tip: You can use the pull-down menu to
display the selected temperature, spin
speed, and any selected extra options.
32
End of program
The door remains locked during the
anti-crease phase. However, the wash-
ing machine door can be unlocked at
any time by touching the Start/
Stop sensor.
Removing the laundry
Pull open the door.
Remove the laundry.
Items left in the drum could discolor
other items in the next wash or be-
come discolored themselves.
Remove all items from the drum.
Check the folds in the door seal for
any foreign objects.
Tip: Leave the door slightly open to al-
low the drum to dry.
Switch the washing machine off with
the button.
If applicable, remove the used cap
from the detergent dispenser drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
Advertisement
Table of Contents
