IMPORTANT
• The provided USB cord is 183cm in length.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should
be placed in a suitable cot or crib.
Battery Information
The swing control module requires (4) size C/LR14 (1.5V) alkaline batteries (not included).
The vibration unit requires (1) size C/LR14 (1.5V) alkaline batteries (not included).
CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may
be shortened or the batteries may leak or rupture. To prevent battery leaks, which can
burn skin and eyes:
• Always keep batteries away from children.
• Always replace the entire set of batteries at one time.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery
compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages,
or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked "rechargeable. "
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dispose of used batteries immediately.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period of time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed
lights, and slow or non-working motorized parts. Because each electrical component requires
a
• Do not dispose of product or batteries in fire, batteries may explode or leak.
This symbol indicates that the product is not to be disposed of in household waste as
batteries contain substances that can be damaging to the environment and health.
Contact local authority for recycling & collection information.
Care and Cleaning
• Seat pad – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten
all hook-and-loop patches to the corresponding patch. Machine wash with cold water,
gentle cycle. No bleach. Tumble dry, using low heat.
• Headrest – Fasten all hook-and-loop patches. Machine wash with cold water, gentle
cycle. No bleach. Air dry flat.
• Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse
in water.
• Frame – Wipe the metal frame with a soft, clean cloth and mild soap.
• Storage – When putting swing away for storage, always store in a dry location, away
from any heat sources, and out of the sun.
– 3 –
Need help?
Do you have a question about the AnyWay Sway PowerAdapt Dual-Direction Swing and is the answer not in the manual?
Questions and answers
The manual doesn't tell me where the batteries go. Where do I put them?
The batteries go in the swing control module of the Ingenuity AnyWay Sway PowerAdapt Dual-Direction Swing.
This answer is automatically generated
Why won't my swing turn on. It's plugged in and still won't turn on. Is there a reset or could the button be stuck
The Ingenuity AnyWay Sway PowerAdapt Dual-Direction Swing may not turn on when plugged in due to several possible reasons:
1. Power Source Issue – Ensure the power adapter is properly connected to both the swing and the power outlet. Try a different outlet to confirm the issue is not with the power source.
2. Auto-Shutoff Activated – If the swing has automatically shut off after the default 2-hour timer, press the Swing Timer Select button or the Speed Selector button to restart it.
3. Loose Connections – Check that all components are securely assembled and connected, as improper assembly could prevent the swing from functioning.
4. Internal Malfunction – If the LED indicators do not light up and the swing does not respond, there may be an internal issue requiring troubleshooting or replacement.
If none of these steps resolve the issue, refer to the manual for further troubleshooting or contact the manufacturer.
This answer is automatically generated
How does the seat turn to face a different direction
The Ingenuity AnyWay Sway PowerAdapt Dual-Direction Swing seat can be rotated to face a different direction using the seat rotation function.
This answer is automatically generated