Table of Contents
Advertisement
OPERATOR'S MANUAL with Maintenance Information
Safety Rules
Do not drive over 0.8 km/h with the platform
raised.
Do not depend on the tilt alarm as a level
indicator. The tilt alarm sounds on the chassis
and in the platform when the machine is on a
slope.
If the tilt alarm sounds:
Lower the platform. Move the machine to a
firm, level surface. If the tilt alarm sounds
when the platform is raised, use extreme
caution to lower the platform.
For outdoor use machine, do not raise the
platform when wind speeds may exceed 12.5
m/s. If wind speeds exceed 12.5 m/s when the
platform is raised, lower the platform and do
not continue to operate the machine.
Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area
exposed to the wind will decrease machine
stability.
Do not use the platform controls to free a
platform that is caught, snagged or otherwise
prevented from normal motion by an adjacent
structure. All personnel must be removed from
the platform before attempting to free the
platform using the ground controls.
Use extreme care and slow speeds while
driving the machine in the stowed position
across uneven terrain, debris, unstable or
slippery surfaces and near holes and
drop-offs.
Do not drive the machine on or near uneven
terrain, unstable surfaces or other hazardous
conditions with the platform raised.
Do not push off or pull toward any object
outside of the platform.
Maximum allowable manual force
Model
Application
Outdoor
S06-HAE
Indoor
Outdoor
S0608-HAE
Indoor
S0808-HAE
Indoor
Outdoor
S0812-HAE
Indoor
Outdoor
S1012-HAE
Indoor
S1212-HAE
Indoor
S1412-HAE
Indoor
Outdoor
S06-ACE
Indoor
Outdoor
S0608-ACE
Indoor
S0808-ACE
Indoor
Outdoor
S0812-ACE
Indoor
4
manual
Maximum
force
occupants
200N
1
400N
2
200N
1
400N
2
400N
2
400N
2
400N
2
200N
1
400N
2
400N
3
400N
2
200N
1
400N
2
200N
1
400N
2
400N
2
400N
2
400N
2
Advertisement
Table of Contents
