OPERATOR'S MANUAL with Maintenance Information
Maintenance
Maintenance Inspection Report
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
• Make copies of this report to use for each
inspection.
• Select the appropriate checklist(s) for the
type of inspection to be performed.
Daily or 8 hours
□
Inspection:
Quarterly or 250 hours
□
Inspection:
Semi-annually or 500
□
hours Inspection:
Annually or 1000 hours
□
Inspection:
Two year or 2000 hours
□
Inspection:
• Place a check in the appropriate box after
each inspection procedure is completed.
• Use the step-by-step procedures in this
section to learn how to perform these
inspections.
• If any inspection receives an "N", tag and
remove the machine from service, repair and
re-inspect it. After repair, place a check in the
"R' box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Checklist A
A-1 Inspect the manuals and decals
A-2 Pre-operation inspection
A-3 Check the Batteries
A-4 Check the Hydraulic Oil Level
A-5 Function tests
Perform after 40 hours:
A-6 30 day service
Checklist B
B-1 Batteries
B-2 Electrical wiring
B-3 Tires and wheels
B-4 Emergency stop
B-5 Key switch
B-6 Horn (if equipped)
A
B-7 Drive brakes
A+B
B-8 Drive speed - stowed
B-9 Drive speed - raised
A+B+C
B-10 Drive speed - slow
A+B+C+D
B-11 Hydraulic oil analysis
B-12 Tank venting system
A+B+C+D+E
B-13 Latch components
B-14 Test the pothole limit switches
and the level Sensor
Checklist C
C-1 Platform overload (if equipped)
C-2 Breather cap - models with
optional oil
Checklist D
D-1 Scissor arm wear pads
D-2 Hydraulic filter
Checklist E
E-1 Hydraulic oil
70
Y N R
Y N R
Y N R
Y N R
Y N R