E-Tech S06-HAE Operators Manual With Maintenance Information page 42

Platform Control Panel
1 Function enable switch
Press and hold the function enable switch
to enable the drive/lift function.
2 Thumb rocker switch
Press the thumb rocker switch in either
direction to activate steer function.
3 Proportional control handle
Lift function: Press and hold the function
enable switch to enable the lift function on
the platform control handle. Move the
control handle in the direction indicated by
the blue arrow and the platform will raise.
Move the control handle in the direction
indicated by the yellow arrow and the
platform will lower. The descent alarm
should sound while the platform is
lowering.
Drive function: Press and hold the function
enable switch to enable the drive function
on the platform control handle. Move the
control handle in the direction indicated by
the blue arrow on the control panel and the
machine will move in the direction that the
blue arrow points. Move the control handle
in the direction indicated by the yellow
arrow on the control panel and the
machine will move in the direction that the
yellow arrow points.
OPERATOR'S MANUAL with Maintenance Information
4 Horn Button
Push the horn button and the horn will
sound. Release the horn button and the
horn will stop.
5 Lift function select button
Press this button to activate the lift
function.
6 Drive function select button
Press this button to activate the drive
function.
7 Drive speed button
Press this button to activate the slow or
fast drive function.
8 LED readout screen
Diagnostic readout and battery charge
indicator.
9 Red Emergency Stop button
Push in the red Emergency Stop button to
the off position to stop all functions. Pull
out the red Emergency Stop button to the
on position to operate the machine.
37
Control Panel