Table of Contents
Advertisement
OPERATOR'S MANUAL with Maintenance Information
Operating Instructions
Battery and Charger Instructions
Observe and Obey:
√ Do not use an external charger or booster
battery.
√ Charge the battery in a well-ventilated area.
√ Use proper AC input voltage for charging
as indicated on the charger.
√ Use only a Dingli authorized battery and
charger.
√ Charge the battery as soon as receive the
machine or after long distance transportation
√ When the battery is stored for a long time, it
needs to be charged regularly. Failure to
charge in time may permanently damage the
battery.
To Charge Battery
1
Be sure the batteries are connected before
charging.
2
Open the battery compartment. The
compartment should remain open for the
entire charging cycle.
Maintenance - free battery
3
Connect the battery charger to a grounded
AC circuit.
4
The charger will indicate when the battery
is fully charged.
Standard Battery
5
Remove the battery vent caps and check
the battery acid level. If necessary, add
only enough distilled water to cover the
plates. Do not overfill prior to the charge
cycle.
6
Replace the battery vent caps.
7
Connect the battery charger to a grounded
AC circuit.
8
The charger will indicate when the battery
is fully charged.
9
Check the battery acid level when the
charging cycle is complete. Replenish with
distilled water to the bottom of the fill tube.
Do not overfill.
Lithium battery
10 During the charging operation,
professional personnel should take care of
it. During the charging process, the plug
and socket should be in good contact, the
charging equipment should work normally,
and the connection points of the battery
60
Advertisement
Table of Contents
