E-Tech S06-HAE Operators Manual With Maintenance Information page 44

Pre-operation Inspection
Be sure that the operator's manual are

complete, legible and in the storage
container located in the platform.
Be sure that all decals are legible and in

place. See Decals section.
Check for hydraulic oil leaks and proper

oil level. Add oil if needed. See
Maintenance section.
Check for battery fluid leaks and proper

fluid level. Add distilled water if needed.
See Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts
and unauthorized modifications:
 Electrical components, wiring and
electrical cables
 Hydraulic hoses, fittings, cylinders and
manifolds
 Battery pack and connections
 Drive motors
 Wear pads
 Tires and wheels
 Ground strap
 Limit switches, alarms and horn
 Nuts, bolts and other fasteners
 Platform overload components
 Platform entry gate
 Beacon (if equipped)
 Safety arm
 Platform extension(s)
 Scissor pins and retaining fasteners
 Platform control joystick
 Brake release components
 Pothole guard
OPERATOR'S MANUAL with Maintenance Information
Pre-operation Inspection
Check entire machine for:
 Cracks in welds or structural
components
 Dents or damage to machine
 Be sure that all structural and other
critical components are present and
all associated fasteners and pins are
in place and properly tightened
 Be sure side rails are installed and rail
pins and bolts are fastened.
 Be sure that the chassis trays are
closed and latched and the batteries
are properly connected.
Note: If the platform must be raised to inspect
the machine, make sure the safety arm is in
place. See Operating Instructions section.
39