Powering Up the CSS
78-13884-03
Booting and Configuring the CSS
This chapter describes how to boot the CSS and using the configuration scripts.
This chapter contains the following sections:
•
Powering Up the CSS
Powering Down the CSS
•
Booting the CSS for the First Time
•
Logging in to the CSS
•
Using the Configuration Script
•
For more information on failure errors and messages that can occur during the
boot process, refer to Appendix C, Troubleshooting.
To power up a CSS:
On an AC CSS, toggle the power switch to the 1 (on) position.
•
See
Figure 2-11
–
–
See
Figure 2-12
See
Figure 2-14
–
each power supply. Power on all of the supplies in the CSS. The AC OK
and DC OK LEDs light up on each power supply. If either LED remains
unlit, refer to Appendix C, Troubleshooting.
Cisco 11500 Series Content Services Switch Hardware Installation Guide
C H A P T E R
for the location of the CSS 11501 AC power switch.
for the location of the CSS 11503 AC power switch.
for the location of the CSS 11506 AC power switch for
3
3-1