Cisco 11500 Series Hardware Installation Manual page 155

Appendix C Troubleshooting
Table C-6
Log File
Sys.log.prev Hard disk or
By default, the CSS has boot logging and system logging enabled and writes the
logged information to the log files on the hard disk or flash disk, depending on the
type of storage in your CSS. Log file information is recorded as ASCII text.
Note If the CSS disk fails, log and archive information cannot be saved to files on the
disk.
For information on:
•
•
78-13884-03
CSS Log File Descriptions (continued)
Log File Destination
Default
Location
flash disk
Configuring logging functions and log messages, refer to the Cisco Content
Services Switch Administration Guide
Using syslogd, refer to your syslogd daemon reference guide
Cisco 11500 Series Content Services Switch Hardware Installation Guide
Alternate
Location Records
Console Backup of a system log file. When a
syslogd system log file reaches its maximum
VTY1 size (50 MB, for a hard disk-based
VTY2 CSS; 10 MB, for a flash disk-based
CSS), the software renames the
system log file to sys.log.prev and
starts a new system log file. The CSS
overwrites an existing backup system
log file when a system log file is
renamed. When you reboot a CSS, the
software continues to use the existing
system log file until it reaches its
maximum size.
Log File Information
C-25