Cisco 11500 Series Hardware Installation Manual page 111

Chapter 3 Booting and Configuring the CSS
•
•
The script enables you to:
•
•
To configure a transparent cache configuration, enter 4 .
Which feature do you want to configure?
[1] Layer3 load balancing
[2] Layer5 load balancing
[3] Proxy cache
[4] Transparent cache
Enter the number for the feature you want to configure: 4
To accept the script default values, press the Enter key at the prompts.
Creating Transparent Cache Configuration
Enter service name: [default = Transparent_Cache1]
Enter service IP address: [default = 0.0.0.0] 192.168.3.7
Create another service? [y/n]? n
Transparent caching can be configured to direct only cacheable content
to the cache server. Non-cacheable content is sent directly to the
origin server.
The alternative is to direct all traffic to the cache server
regardless of whether the content is cacheable.
Should only cacheable content be directed to the cache server? [y/n]?
Enter:
•
•
78-13884-03
Activates the services
Activates the content rule
Configure a service name (Transparent_Cache1)
Define whether to direct only cacheable content or all content to the cache
servers
y to define URL "/*" as eql-cacheable in the content rule and allow the CSS
to direct only cacheable content to the cache servers
n to define URL "/*" in the content rule and allow the CSS to direct all
content to the cache servers
Cisco 11500 Series Content Services Switch Hardware Installation Guide
Using the Configuration Script
3-19