Specifications; Maintenance And Precautions - Chasing M2 User Manual

Specifications
EN
ROV
Size 15*10.5*6.5 inch
Weight 4.5kg
Battery 97.68Wh
Maximum Depth 328 ft
Maximum Speed 1.5 m/s (3 Knots)）
≤4h (Depend on working
Battery Life
condition)
Battery Cycle >300times
Operating
14℉~113℉
Temperature
Dimmable LED Lights
Brightness 2 x 2000lm
Color Temperature 5000K~5500K
CRI 85
Dimming Three adjustable
Sensor
Three-axis gyroscope
IMU acceleration
compass
Depth Sensor ＜±0.25m
Temperature Sensor ＜±2℃
13
Remote Controller
Size 6.3*6.1*4.9 inch
Weight 0.685kg
Battery capacity 2500mAh
≥6H (Depend on working
Battery life
condition)
Wireless Wi-Fi
HDMI 1080P
TYPE-C USB communication
Tether & Winder
328ft Version (100M) 1.8kg
656ft Version(200M) 2.5kg
Adapter
Adapter 2.9A/25.2V
ROV Charging time 2.5h
Remote controller
2h
charging time

Maintenance and Precautions

Navigation Safety
1
Open sea Relatively clear
navigation water quality, no
dense seaweed
Battery Protection
2
Do not run out Charge when
of battery power power is less
than 25%
Charging Protection
3
·Only use the Chasing standard adapter.
·Red light means charging.
·Green light means fully charged.
a. Do not touch the propellers of the Thruster
b. Do not unlock the Thruster for more than 30 seconds in the air to avoid
overheating
c . After using the ROV in the salt water, please put it in fresh water for about 1
hour and turn it on, let the drone run for10 minutes to discharge the salt,
and try out the water after cleaning with a towel.
5 Connector Sockets /Tether Connectors
·Check the Connector socket and tether pre-dive, keep dry and clean.
Salt and moisture may cause corrosion of the connector. Be sure to wash the
socket with fresh water if
the interface has water stains, and make the connectors dry after cleaning.
330ft
No dense radio Do not dive
or radar signals more than
330 ft
Working
temperature
When not in use,
-10 °C ~ 60 °C
keep battery power
at 50% - 70% ( -18°F-140°F)
4
Thruster/ Propeller
EN
14