Table of Contents
Advertisement
Page 190 of 302
Back up and restore MAT/OTM data
Update ITG node properties
Add an ITG Line 2.0 card to the node
553-3001-204 Preliminary 0.10 August 2000
ITG line card 2.0 administration
The MAT/OTM Backup Wizard is used to backup and restore any or all of
MAT/OTM PC based data, including ITG MAT/OTM data. All of the ITG
data is stored in an Access database file on the MAT/OTM PC or Server. This
file is only backed up when the user selects the "Disaster Recovery" option.
This option backs up all MAT/OTM data and can only be used to restore all
data.
For more information on using the MAT/OTM Backup Wizard, see the
Common Services User Guide in the MAT/OTM User Guides.
Procedure 35
Updating the ITG node properties:
1
In the MAT/OTM Navigator window, select the ITG IP Phones icon
from the "Services" folder. The system displays the "IP Telephony
Gateway - IP Phones" screen.
2
Click the right mouse button on a card and select Node | Properties
from the pop-up menu.
3
Perform all required updates to the ITG Node "General" tab
parameters.
4
If you add or delete ITG Line 2.0 cards from the node or change an ITG
Line 2.0 card (refer to the Maintenance section for the procedure to
replace an ITG Line 2.0 card), then use one of the following
procedures:
• "Delete an ITG Line 2.0 card from the node" on page 191
• "Change an IP address" on page 191
—————————— End of Procedure ——————————
Procedure 36
Adding an ITG line card to the node
Refer to "Installation and configuration of ITG Line 2.0 node" on page 111 and
Procedure b on page 128, to add a card to a node.
Advertisement
Chapters
Table of Contents
