Control System Description; Troubleshooting - MALTEC CARBON720W WIFI Instruction Manual

Carbon panel heater
Table of Contents

Advertisement

Available languages

Available languages

Open the remote controller rear cover and install a CR2025 battery. The buttons have the
same function as the main control panel
Wi-Fi and app operation :
The heater can also be controlled with an app on your smartphone. To do this, the heater
must be connected to a Wi-Fi modem.
1. Download the control App from App store or Android market.
2. Open the app and select Register
3. Enter your mobile phone number, the country code has already been filled in for you
4. You will receive an SMS with a verification code. Within 60 seconds, enter this
verification code and your chosen password and select confirm to confirm the registration.
5. In order to use the App, your heater must be added once to the App. Select Add Device.
6. On the heater, the WiFi indicator light will blink rapidly
7. When the lamp on the heater is blinking rapidly, select in the App: confirm indicator
rapidly blinking
8. Enter the correct Wi-Fi password
9. A connection will now be made between the App and the heater
10. Select 'Done' once the connection has been successfully established
11. The screen for operating the heater will now appear
12. Select ... at top right in the control screen, then select Modify Device Name to give
your heater a logical name so that it is clear to you which heater it is.
13. Your heater now can be controlled by the App,
week timer in the App.
14. After connected, the WiFi indicator light on the heater will stop blink and keep on.

Control System Description

Control Panel:
1. Power on/off switch
2. Display
3. WiFi indicator light
4. Timer button
5. Temp./Timer UP key
6. Temp./Timer DOWN key
Trouble Shooting
If your heater fails to operate, please follow these instructions:
Ensure that your circuit breaker or fuse is working properly.
Be sure the heater is plugged in and that the electrical outlet is working properly.
If the ON/OFF switch is not illuminated at ON position, send it to service center for
reparation directly.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE
WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN
OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND
you can set the temperature and one
11/12
1
2
3
4
5
6

Advertisement

Table of Contents
loading

Table of Contents