Mitsubishi Electric AE630-SW Instruction Manual page 2

Make sure to observe the following matters of safety
 Before using the device, make sure to read these safety precautions and instruction manual thoroughly. The cautionary items
noted herein are of the utmost importance for the safe use of this device, and should always be strictly followed.
 Make sure that the final user receives this manual.
 This instruction manual is prepared for an electrical expert.
The following symbols have been used:
Failure to follow these instructions
may result in dangerous conditions,
DANGER
which in turn could lead to severe
personal injury or even death.
This means prohibition. Never ignore
this indication.
Make sure to follow these
instructions without fail.
 Do not use the device on the conditions over range. Failure to do so may result in fire.
 Do not touch the terminals. There is a risk of electrical shock.
 A qualified electrician should install this equipment.
 Make sure to tighten the terminal screws to the torque specified in this manual. Failure to do so may result in malfunction
or fire.
 Do not install in areas subject to high temperatures, high humidity, dust, corrosive gas, vibrations, shocks, etc. To do so
may result in malfunction or fire.
 Install so that trash, concrete dust, iron filings or rainwater cannot get into the device interior. Failure to do so may result
in malfunction or fire.
Mitsubishi Electric Corporation puts the maximum effort into making electric products better and more reliable, but generally
electric products may incorrect-operate under the influence of a noise etc.
In order not to cause abnormalities to a system by the influence of a noise etc., please retry 3 times or more with master
software in case of error reply or no reply.
● SAFETY PRECAUTIONS ●
DANGER
CAUTION
CAUTION
E-2
Failure to follow these instructions
may result in dangerous conditions,
CAUTION
which could result in moderate to
slight personal injury or damage to
equipment and facilities