Installation; Iec Rail Installation - Mitsubishi Electric AE630-SW Instruction Manual

4. Installation

4.1 IEC rail installation

Installation of BIF-MD and BIF-CON on the 35mm IEC rail (DIN rail) is shown as below.
The applicable IEC rail is shown in figure 4.1.
(A) Installation
①Hook on the upper side of rail
Fig 4.1: 35mm IEC rail
②Push BIF-MD/BIF-CON into rail until it clicks
Fig 4.2: Installing
(B) Removing
①Insert a screwdriver (flathead)
into the hole of IEC rail latch
②Push up a screwdriver
Fig 4.3: Removing
E-16