2.1 Important Safety Instructions
The Alarm is designed to be permanently mounted using the fixings supplied. The mounting plate
can be screwed directly to the ceiling or wall.
The battery for this Alarm is in a sealed compartment. Do not attempt to open the Alarm to get
access to the battery as it is not replaceable.
WARNINGS:
1) Do not install Alarms in new or renovated buildings until all work is completed
2) Do not test with flame. This can set fire to the Alarm and damage the house.
3) Do not paint or cover in any way your Alarm as this will affect its sensitivity
4) Do not attempt to remove, recharge or burn the battery, as it may explode
5) Do not expose the battery to excessive heat such as sunshine, fire, etc...
6) Do not interfere or tamper with the Alarm as it may result in malfunction
7) Do not dispose of your Alarm in a fire
13