Eco - VALBERG WF 1014 B AID W180C Instructions For Use Manual

B B
Using the appliance Utilisation de l'appareil
28 28 EN FR
B B
Utilisation de l'appareil Using the appliance
Add detergent, close the door and set the program
Load the clothes to be washed m the drum and close the door. Add the detergent into the
relevant compartments for the type of program you are going to select, Add detergent as
described in Auto Dosing operation guide.
1. Press the «On/Off» button.
2. Press program selection button to required program, start up and default the program as
«Cotton»
3. Select washing temperature and spin speed by pressing «Temp.»and «Spin» buttons.
4. Press «Prewash» ,«Extra Rinse»,«Time save», «Power Save» button to select additional
functions.
5. After starting the program, display window displays program length (hours: minutes),
washing temperature and additional function options in sequence.
Addition function selection
At standby state, press «Prewash» ,«Extra Rinse»,«Power save», «Time save»button to select
additional function for current program. Select the function , and then corresponding icon
ligbts up. After starting up, program cannot be changed.
Pre-wash
Select the function to conduct pre-wash so as to enhance washing effects and better remove
stains. Tbis function is suitable for heavy dirt clothes.
Power Save

ECO

The Power Save indication lamp is on after the function is selected, and the indication lamp
will be off after the program ends.
The Power Save function is only added under the standby state of its applicable program, that
is, before the program is started. After the program is started, the function cannot be selected.
The actual temperature be reduced by 5°C and the main wash time be reduced after the
function is selected.
Extra Rinse
After set the function of Extra Rinse, the program runs the rinsing process once again before
running the softening, and the total running time of the program increases accordingly.
Time Save
After pressing this function button,the program time will be shortened according to the
setting,and the program time will be increased back to the original setting by pressing the
29 29 EN FR