Smart Start SmartMobile Insight User Manual page 15

SmartMobile
Insight
not allowed during this time. The device will continue
uploading data until all data has been transferred.
12. Battery Low – Plug in Power: The battery is almost dead.
Please plug in power to charge the battery. Skipped tests
due to a dead battery are violations and will be reported.
13. : A reminder that you are due for service and/or
payment. DO NOT IGNORE THE SERVICE WARNING
GRACE PERIOD.
14. Payment is past due: The device is in lockout due to
missing your payment date or other issues with the
device. You will not be able to take a test and are required
to call Smart Start at 844.785.7971 for further instructions.
15. Calibration is past due: The device is in lockout due to
needing a calibration. You will not be able to take a test
and are required to call Smart Start at 844.785.7971 for
further instructions.
16. Test Incomplete - Blow Harder: You did not blow long
enough to finish the test. A retest is required. Wait for the
unit to display "Press button to start test" or "Test
Required – Press button to start test" and take another
test. This time blow longer and slightly harder.
17. Test Incomplete - Blow Softer: You blew too hard. A
retest is required. Wait for the unit to display "Press
button to start test" or "Test Required – Press button to
start test" and take another test. This time blow longer
and softer (not as hard).
18. Test Error - Please Retry: Your unit did not complete the
test successfully. A retest is required. Wait for the unit to
display "Press button to start test" or "Test Required –
Press button to start test" and take another test.
19. Too Cold - Plug in Power: Your unit is too cold for normal
operation and will not allow a test. Plugging in the power
supply will enable internal heaters that can speed up the
time required to reach operating temperature. Please
make sure you are using the device in normal room
― 15 ―
User Manual