Operation Settings; Operation Setting Functions - Mitsubishi GO T1000 User Manual

11.3 Operation Settings

11.3.1 Operation setting functions

Setting regarding GOT operation can be set.
The items which can be set are described below.
Function
Buzzer volume setting
Window move buzzer volume setting
Security setting screen change
Utility call key screen change
Key sensitivity setting
*1 Relationship between the "key sensitivity" setting and the "key reaction speed"
Larger the setting value of the "key sensitivity" is, shorter time GOT takes to react after the touch panel is
touched.
For example, when touching the GOT screen once causes a two-touch operation, set the key sensitivity to
a smaller value. (It makes reaction speed slower.)
The following shows the relationship between the "key sensitivity" setting and the "key reaction speed".
"Key sensitivity" setting value
"Key reaction speed"
11 - 8 11.3 Operation Settings
11.3.1 Operation setting functions
Buzzer volume setting can be changed.
Whether turn ON/OFF buzzer when move window
can be selected.
Security level change screen can be displayed.
Section 11.4 Security Level Change
Utility call key setting screen can be displayed.
Section 11.5 Utility Call Key Setting
The sensitivity of touch panel when GOT screen is
touched can be set.
8 7
-20 -10
Operation settings by GT Designer2
Set buzzer volume and window move buzzer volume by [GOT setup] in [System
Environment] of GT Designer2.
When change a part of the setting, change the setting by the GOT display setting
after downloading the project data.
GT Designer2 Version
(Section 3.8 Setting of the GOT display and operation (GOT setup))
Contents
6 5
Standard(±0) +30
Screen Design Manual
Setting range
OFF/SHORT/LONG
<At factory shipment:
SHORT>
ON/OFF
<At factory shipment:
ON>
1 to 8
4 3 2
+60 +120 +240
*1
1
+480