14.6 Touch Panel Check
14.6.1 Touch panel check function
Touch panel check is a function which checks whether there is no dead zone area in touch key minimum unit
(16 dots x 16 dots).
14.6.2 Display operation of touch panel check
Main menu
(
Section 9.3 Utility Display)
Touch [Debug & Self check].
Starting the touch panel check
Touching [Touch panel check] in the [Self check]
displays the screen describing the touch panel check
operation.
Touch the
start the touch panel check.
14 - 14
14.6 Touch Panel Check
14.6.1 Touch panel check function
Debug & self check
OK
button in the description screen to
Notes on Touch panel check
If the touched part is not filled with yellow color, there are the following two possible
causes.
1. Display part failure
2. Touch panel failure
In that case, contact your nearest sales office or FA Center.
Touch [Self check].
Self check
Touch
[Touch panel check].