Table of Contents
Advertisement
9. Installation settings and test run
⇒
TOP screen
Menu
① Installation settings menu #1
Installation settings
Installation date
Company information
Test run
Static pressure adjustment
Change auto-address
Next
Select the item.
The selected screen is displayed.
④ Company information
Company information
Company
5
Phone No.
6
Select the item.
Enter the company information.
⑦ Test run
Test run
Cooling test run
Drain pump test run
Compressor Hz fixed operation
Select the item.
The selected screen is displayed.
⇒
Service setting
② Installation settings menu #2
Installation settings
3
Address setting of main IU
4
IU back-up function
7
Infrared sensor setting
10
11
Back
Select the item.
The selected screen is displayed.
⑤ Enter the Company
Company
Number
カナ
Back
Delete
Input the name & tap [Set].
Enter the company name using up to
26 one-byte characters and then tap
the
Set
alphanumeric, Japanese Kana, Kanji,
Cyrillic, or Chinese characters.
⑧ Cooling test run
Cooling test run
8
9
When tapping [Start], test run starts
for 30 min. at 5°C in cooling.
Finish-condition of test run is follows.
Passage of 30 min./Stop the IU/Change "Set temp",
"Operation mode" on the TOP screen.
Back
This can be operated while cooling is
stopped. When the room temperature
is too low to start the cooling test run, it
operates for 30 minutes by decreasing the
set temperature to 5°C.
⇒
Installation settings
13
14
17
Previous
Back
Set
Alphabet
漢字
汉字
Next
Back
button. You can enter
Start
Back
−15−
Service password
③ Installation date
Installation date
dd
mm
Set the date.
Select the date with ▲ ▼ buttons,
and tap the
Set
⑥ Enter the Phone No.
Phone No.
Input the phone No & tap [Set].
Enter the phone number of the company
using up to 13 characters and then tap the
Set
button.
⑨ Drain pump test run
Drain pump test run
Run
Select the item.
Drain pump can be operated
independently.
yy
Set
Back
button.
Delete
Set
Back
Stop
Back
Hide quick links:
Advertisement
Chapters
Table of Contents
